HomeNews/Press ReleasesNeutrex Introduces New Purgex® 460 Plus to Purge Blown Film Lines

News/Press Releases

Free Sample, Call for details

A few words from our customers

"Just thought I would drop you an E-mail on how impressed I continue to be with your product (Purgex 456 Plus).... We ran approximately 8 to 10 pounds of Purgex 456 Plus through the machine and within 2 shots we were making clear parts with zero black specks...."

Thanks again,

Daniel
Production Manager
A Molder in Illinois

"Just wanted to let you know that we are very pleased with your Purgex 457 Plus product…Being a custom molder, it is not unusual for us to run a variety of resins on the same machine each week. Purgex allows us to make these resin and color changes in half the time, versus conventional methods, with much fewer rejects and start-up scrap…Thanks for the great product."

John
Operations Manager
A Custom Molder in East Texas

Neutrex Introduces New Purgex® 460 Plus to Purge Blown Film Lines

(DECEMBER 2008) – Neutrex, Inc., Houston, Texas announces the introduction of its new Purgex 460 Plus commercial purging compound (CPC) for cleaning film lines. According to the company, the new CPC is a strong blend that is effective for purging heavily contaminated lines, particularly those infrequently purged. It can also be used to purge sheet molding lines. Neutrex reports that using Purgex 460 Plus will result in shorter cleaning cycles, lower purging material costs, and greater reliability in controlling the release of contaminants during production runs.

Supplied ready-to-use, Purgex 460 Plus is engineered for commodity resins, specifically polyolefins. It is designed for color and/or material changes and the removal of residual contamination, cleaning the extruder, screen pack housing, and die/manifold, removing all types of color bodies, carbonized material and degraded resins. Neutrex states that Purgex 460 is very effective in purging the new series of biodegradable and compostable polyethylene resins that are growing in popularity and availability.

New Purgex 460 Plus is a blend of low-linear polyethylene carrier and FDA-approved active ingredients that are non-toxic, non-abrasive and safe. Supplied in pellets without fines, the new CPC has an operating temperature range of 250°F to 450°F (120° to 232°C) and is easy to remove, according to Neutrex.

Purgex 460 Plus is the latest addition to the Purgex line of CPCs for cleaning thermoplastic injection molding, extrusion, and blow molding processing machinery. For literature and additional information, contact:

Neutrex, Inc.
11119 Jones Road
West, Houston, TX 77066 USA.
Toll-Free: 800-803-6242
Phone: 281-807-9449
Fax: 281-807-9748
Email: sales@purgexonline.com

###

Please address inquiries to Purgex/Neutrex:
Kathleen Jarvis, National Sales Manager, Neutrex, Inc.
Toll-Free: 800-803-6242 * Phone: 281-807-9449 * Fax: 281-807-9748
Email: kathleen.jarvis@purgexmail.com

Outside the USA, contact:
Jason Pizcazotowski, International Sales Manager, Neutrex, Inc.
Toll-Free: 800-803-6242 * Phone: 281-807-9449 * Fax: 281-807-9748
Email: jason@neutrex.com

For electronic files and additional information, contact:
Kenneth A. Boos, Account Executive, Harold Warner Advertising, Inc.
Phone: 716-852-4410 * Fax: 716-852-4725
Email: extra@haroldwarner.com